Miniature Circuit Breaker
miniature circuit breaker is mainly suitable for overload and short
circuit protection. It is especially used for illumination and
distribution in industry and commerce, etc. it is of pleasing
outlook & high breaking capacity, reliable performance, high
inflammable resistance and shock resistance for long service life.
It is within the circuit of AC 50/60HZ, rated voltage of single
pole up to 230V, two, three or four poles up to 400V. It can also
be for an unfrequent switchover of the circuit and illumination
under normal conditions.
Short circuit protection, Over current protection
Number of Poles
No less than 8000 operations
(o-c)no less than 20000 operations
1. Product Net weight: 128g/pole
2. Packing quantity& Weight: 12 pcs /box, 20 box/carton, 240
3. N.W: 22.5 KG/carton
4. G.W:24 KG/carton
5. Packing Measurement: inner box 22.5×9×8 cm, Carton 46×23.5×33.5
cm ( ie 0.036 cbm)
6.20 foot container (28 cbm): 19,2000 pole ,800cartons
7.40 foot container (56 cbm): 38,4000 pole, 1600 cartons
1. When DX-S series Miniature Circuit Breaker
need store for a long time,not control the product store
environment ,the metal and paint coat will be corroded.So ,take
2.Products must store with room temperature and dry environment
.Sealing when under high humidity environment.
3.Don't store the products with acid volatile liquid and acid gas
together.Don't store in high dust environment.
4.Don't store the products in high temperature and humidity or
lowest temperature for a long time ,please install and use as soon
5.Don't contact the link wire before products used
normally,preventing corrosion from pre-contacting.
6.Please inform and operate under the manufacturer' advise
referring to special store environment such as high temperature and
humidity,islands near equator,ultra-low temperature area.
1.Long distance transported with the matching distribution box
,circuit breaker should package separately and fixed when you use.
2.Desiccant should be placed within package under the wet
environment of long-distance transportation.
3.Products by sea should with Sealed package: using the vacuum
sealed packaging or plastic film packaging in a cabinet or box with
products., preventing corrode metal parts from raining,watering ,
high-humidity and temperature.
4.Besides sealed package by sea,please using normal transport
packaging to protect such as wooden boxes,iron boxes ,cabinets,etc.
5.Avoiding contact acid gas and liquid during transportation.
6.If products are caught in the rain or corroded during
transportation,please use after the manufacture testing.